Can new counters go on my existing cabinets?

Often, yes, as long as the cabinets are level, strong and in good condition. Heavy stone needs solid support, and some older boxes need reinforcement. We check the structure before we template, and we tell you if the cabinets are worth keeping or if replacing them would give better value. We also watch for water damage under the old sink.

How do I choose between quartz and granite?

Quartz is manufactured, uniform and easy to maintain, while granite is natural, varied and heat tolerant. Granite should be sealed from time to time, and quartz generally should not. Think about color preference, upkeep and budget. We bring samples of both so you can compare how they look next to your cabinets.

Will the backsplash need to be redone with new counters?

Usually part of it does. Removing old tops can damage the wall behind them, and the new counter may be a different thickness. A fresh backsplash hides those changes and finishes the look. If your current backsplash is in good shape and the heights match, we can sometimes keep it. Wall tile may also need adjusting where the old counter sat.

Is it difficult to remove tile countertops?

It is messy work. Tile is set in mortar over a backing board, which has to be chipped out without cracking the cabinet frames. Dust and noise are part of the process. We protect floors and surrounding surfaces, and we check the plywood underneath for water damage before the new counter goes on.

How long does stone fabrication take?

Once the template is made, a fabricator cuts and polishes the stone, which can take from several days to a couple of weeks depending on workload and material. Special slabs may require ordering first. We give you a schedule with the estimate and tell you if anything changes as it is ordered.

Free consultation
Fixed-price proposals

Call now (503) 555-0199

(503) 555-0199 Start my kitchen quote

Remodeled craftsman kitchen in Portland on a rainy gray morning

Tract-era kitchens ready for new surfaces

Kitchen countertops and remodeling in Tigard, OR

Quartz, granite and marble for Tigard kitchens, with the cabinets and backsplash to match. Request a quote and we will confirm availability.

Call us Start my kitchen quote

Full remodels, cabinets and countertops
Scope and plan put in writing
Built for older Portland homes

Free consultation

Fixed-price proposals

Clear communication

Design help

Tigard kitchens often outgrow their original surfaces

Tigard lies southwest of Portland, with Highway 99W, Interstate 5 and Highway 217 crossing the city. Much of its housing grew in the later decades of the last century, with subdivisions of two-story and single-level homes built around a family kitchen.

The cabinets in many of these homes are still sturdy, but the surfaces show their age. Tiled counters with grout lines, scratched laminate and worn edges are common. Replacing the countertops often changes the whole room, and it is the project most Tigard owners ask us about first.

Updating the surface is usually quicker than a full remodel, which suits busy households.

Why dated counters become a daily problem

Tile counters collect grime in grout lines and can chip near the sink, while older laminate bubbles where water reaches the seams. Both are tiring to keep clean in a house where the kitchen is the center of every morning.

New surfaces solve the cleaning and staining problem, but they also change how the room works. A deeper sink, a different faucet or a cooktop swap can all be handled during one visit if they are planned first. The tricky parts are removing the old top without damaging the cabinet below, and getting the new top level when a house has settled a little.

Services for Tigard kitchens

Tigard owners can request any service, and the form confirms scheduling.

Countertops - quartz, granite or marble, templated and installed with the sink and cooktop cutouts.
Backsplash and flooring - fresh tile or a simple full-height slab to finish the wall behind the new surface.
Cabinets - new doors and drawer fronts on solid boxes, or replacement where they are worn out.
Full kitchen remodels - complete updates when the layout, lighting and appliances are also due.
Islands and layouts - adding seating or an island when the room has the space.

Many owners start with counters and add the backsplash or cabinet doors a little later.

The right surface depends on how the kitchen is used:

Quartz. Even in color, resists stains and needs no sealing, but it can be damaged by very hot pans.
Granite. Natural patterns and good heat tolerance, with periodic sealing.
Marble. Beautiful but softer, and it may etch from acids such as lemon juice or wine.
Edge and thickness. A thicker edge looks substantial but weighs more and costs more.

Samples are the most reliable way to judge color and pattern, and we bring them to your kitchen so you can see them under your own lighting.

Permits, templating and the day of installation

Replacing counters alone usually does not need a permit, though plumbing or electrical changes during the same project might. Tigard has its own building office, and the surrounding area can fall under county rules, so we check before scheduling.

After the old surfaces come off, a template is made and the fabricator cuts the new stone. That step takes some time. Plan to use the kitchen without a sink for a short stretch around installation day, and empty the cabinet under the sink and the drawers near the cooktop beforehand.

Having the sink and faucet on hand before templating avoids delays, since fabricators cut to their exact dimensions.

How a Tigard countertop project unfolds

Ask for a quote with photos of the kitchen, including the sink and cooktop area.
We visit with samples, measure and discuss edge shapes, sink choices and backsplash height.
A written estimate follows, with the material, fabrication and installation itemized.
After you pick a slab, we template, order and schedule the install.
We seal and clean where needed, and explain simple daily care.

Use the contact form or call (503) 555-0199. We serve Tigard rather than being located there, so your request is how we confirm availability.

Keep the old sink and faucet if you plan to reuse them, and tell us before the visit so we can bring the right shutoff tools.

Get a quote in Tigard

Tell us what you need and we call you back.

No obligation.

Step 1 of 3

What is the project?

Full remodelCabinetsCountertopsLayout change or extension

Other areas we serve

Questions about Tigard

Can new counters go on my existing cabinets?: Often, yes, as long as the cabinets are level, strong and in good condition. Heavy stone needs solid support, and some older boxes need reinforcement. We check the structure before we template, and we tell you if the cabinets are worth keeping or if replacing them would give better value. We also watch for water damage under the old sink.
How do I choose between quartz and granite?: Quartz is manufactured, uniform and easy to maintain, while granite is natural, varied and heat tolerant. Granite should be sealed from time to time, and quartz generally should not. Think about color preference, upkeep and budget. We bring samples of both so you can compare how they look next to your cabinets.
Will the backsplash need to be redone with new counters?: Usually part of it does. Removing old tops can damage the wall behind them, and the new counter may be a different thickness. A fresh backsplash hides those changes and finishes the look. If your current backsplash is in good shape and the heights match, we can sometimes keep it. Wall tile may also need adjusting where the old counter sat.
Is it difficult to remove tile countertops?: It is messy work. Tile is set in mortar over a backing board, which has to be chipped out without cracking the cabinet frames. Dust and noise are part of the process. We protect floors and surrounding surfaces, and we check the plywood underneath for water damage before the new counter goes on.
How long does stone fabrication take?: Once the template is made, a fabricator cuts and polishes the stone, which can take from several days to a couple of weeks depending on workload and material. Special slabs may require ordering first. We give you a schedule with the estimate and tell you if anything changes as it is ordered.